The products selected by the aluminum-plastic panel manufacturers must meet the requirements of use in terms of specifications and quality, so what is the construction method of aluminum-plastic panels?
Lofting is performed first, and the cylinder horizontal line and centerline are ejected. According to the horizontal line and the center line, release the horizontal line required by the plastic aluminum plate ceiling design drawing, calculate the block size of the plastic aluminum plate according to the actual size, and draw the processing drawing. It is necessary to pay attention to the processing of aluminum-plastic panels, according to the size of the processing drawing, the aluminum-plastic panels are reasonably discharged, and the milling, bending, and bending are also carried out. Then for the installation of steel and aluminum keels, when using aluminum keel installation, the aluminum keel is first fixed on the floor according to the size and position of the sample drawing, which must be installed firmly, the surface is flat and the size is accurate. For the part installed with steel keel, in order to prevent electrochemical corrosion, anti-corrosion treatment or gasket can be added.
Then there is the installation panel, the plastic aluminum plate of the plastic aluminum plate manufacturer and another plastic aluminum plate or other materials, connected by rivets, bolts, screws, nails, etc. Finally, there is gluing, which is to fill the joints with gasket material.
The main uses of aluminum-plastic panels are curtain walls, interior and exterior decoration. Among them, the curtain wall is the external maintenance component of the building, also known as the suspended hanging wall, which does not bear the main structural load, and mainly bears its own weight, wind load, seismic action and temperature action. Self-weight is a gravity load, often acting on the constant load, due to the small density of aluminum-plastic panels, so the stress generated by the mass is small, and does not play a major role.